FAQ
-
Why you should get uninterruptible power system maintenance?
- 2019-06-18 17:39:14
- admin
As we all know,for your uninterruptible power system, regular maintenance and occasional parts replacements can ensure your UPS running smoothly and get normal reliability.Why? 1.Regular UPS maintenance can help avoid a unexpected loss. There will be some unexpected power quality issues, no matter your UPS or other equipment around the facility. Usually we’ll look at the UPS system with an experie...
-
Can I use a uninterruptible power supply and a generator together?
- 2019-06-18 17:51:09
- admin
Yes. Similar to a uninterruptible power supply, a generator provides backup power. However, when utility power fails a UPS system detects the condition and switches to battery backup to keep supplying power to the protected loads. Meanwhile, the auxiliary generator starts up within 10-15 seconds; time may vary by generator type. However, a generator does not actively condition or regulate voltage ...
-
Can UPS truly protect your equipment?
- 2019-06-18 17:54:06
- admin
Yes, with the fast development of telecom and network technology, UPS is widely used in various industries. UPS, that’s uninterruptible power system, it can provide power protection and backup power for your equipment.Usually, it protect your equipment as following two aspects: 1) A UPS system provides a continuous power supply. As we all know, for some sensitive operations such as hospital facili...
-
How can I distinguish the UPS(uninterruptible power system) with good quality ?
- 2019-06-18 17:01:30
- admin
Testing.it is the best solution for you to tell a“good”quality from some “poor”quality UPS. You may attention some factors as following: 1.Does the uninterruptible power system have a manual bypass switch? If the UPS is broken or is being serviced, can you pass power through it to your equipment? The last thing you want is for a broken UPS to be the cause of extra downtime. 2.Sinusoidal power outp...
-
How long can equipment on a uninterruptible power supply keep running and what does a UPS do after the power goes?
- 2019-06-18 16:59:11
- admin
At first ask yourself two questions: 1. What’s your UPS system capacity and What kind of equipment your UPS protects? For most typical computer workstations, one might have a UPS that was rated to keep the machine alive through a 15 minute power loss. Or usually 15 minutes to 2 hours. If it is important for a machine to survive hours without power, one should probably look at a more robust power b...
-
How often should you replace UPS batteries?
- 2019-06-18 16:50:58
- admin
When you buy a single phase UPS/three phase UPS,you should consider batter replacement. Replacing the batteries will allow the uninterruptible power system to remain in service, causing little or no disruption to its operation. Replacing the entire UPS system is usually more disruptive and expensive, but it will provide fresh batteries, fresh components and a new warranty. Replacing the UPS may al...
-
How can you save energy without compromising protection?
- 2019-06-18 17:36:57
- admin
Uninterruptible power system(UPS) can save energy and help you reduce your power, cooling and infrastructure requirements, contributing to lower capital expenditures and operating costs. UPS Efficiency Try to find a UPS supplier that manufactures high efficiency UPS. Though all UPS systems are less than 100% efficient , high efficiency will reduce your plenty of money and time, including maintenan...
-
How can you make sure your online UPS system have enough backup runtime?
- 2019-06-18 17:35:35
- admin
Expandable-run time UPS Systems As UPS(uninterruptible power supply) supplier, Sicon provide detailed run time data for the UPS system within the range of load levels it can support. If the uninterruptible power supply has an 80% load, the included batteries typically provide sufficient backup run time to support uninterrupted operation during outages lasting five to ten minutes. Many online UPS c...
-
Which input and output power connections of UPS do you need?
- 2019-06-18 17:35:05
- admin
UPS Input First, you need to make sure the UPS(uninterruptible power system) will be able to connect to a compatible AC circuit in the installation location, including a compatible outlet if the UPS has an input plug. If a compatible circuit is not available, you will need to make arrangements to have one installed or to choose a UPS system that is compatible with an existing circuit. UPS Output Y...
-
How should a battery be maintained?
- 2019-06-18 16:22:03
- admin
Regular charging and discharging is very important for UPS battery maintenance. You can regularly execute this function if your uninterruptible power system has the battery detection feature. Otherwise, you can simply unplug the input to your UPS to simulate a grid power black-out and check the time the battery takes to discharge. Please replace your UPS battery with new ones when the discharge ti...
- first page
1
- 2
- >>
- last page A total of
2
pages