English
Sicon Chat Union Electric Co.,Ltd

DPM 15kW / 20kW / 30kW DC Charging Module

DC charging module for EV Charger

15kW / 20kW / 30kW

260V~530VAC Input

200VDC-500VDC / 300VDC-750VDC / 300VDC- 950VDC Output
Input THDI <3%

Communication interface: CAN/RS485

Support CCS( Combo 1, Combo 2), CHAdeMO, GB/T

Inquiry now

Overview
DPM series charging module is the internal DC power module of out-door integrated DC charging piles, which converts AC to DC and then charge electric vehicles, providing reliable DC supply for equipment requires DC power.The input of charging module is three-phase mains, output DC is adjustable200VDC-500VDC /300VDC-750VDC/ 300-950VDC, to meet various voltage demands of different battery packs.


Feature
    1.High power density saves system space; Power of each module is 15KW/ 20KW/ 30KW.
    2.Wide range of input voltage, 260V~530V, input surge protection design.
    3.System adopts full digital DSP control technology, achieves pure digital control from input to output; adopts interlaced series resonance soft switch technology to reduce the tolerance of power devices. 
    4.Input THDI <3%, input power factor can reach 0.99, the efficiency can reach 95% and above. 
    5.Ultra-wide range of output voltage, 200VDC-500VDC / 300VDC-750VDC/ 300-950VDC (adjustable), to meet various voltage demands of different battery packs. 
    6.Low output DC ripple wave, has no influence on battery’s working lives. >
    7.The monitor is equipped with standard CAN/RS485 communication interface, can easily exchange data with external devices. 
    8.Input over voltage protection, under voltage alarming, output over current and short circuit protection functions. 
    9.Can constitute parallel redundancy systems and has hot-swapped function, which improves the availability, reliability and maintainability of the system. 
Application
    All charging piles: CCS( Combo 1, Combo 2), CHAdeMO, GB/T
Related Products
    >> EVDS DC Fast Charging Pile
Related Solution 
    >> EV Charging Solution

Power: 15KW

Wide range of input voltage, 

260V~530V, input surge protection design.

Ultra-wide range of output voltage, 

200V-500VDC / 300VDC-750VDC

 (adjustable), to meet various voltage demands of different battery packs.

DC Charging Module
                                                                                                
Power: 20KW/ 30KW
Wide range of input voltage, 260V~530V, input surge protection design.
Ultra-wide range of output voltage, 200V-500VDC / 300VDC-750VDC/ 300VDC- 950VDC
 (adjustable), to meet various voltage demands of different battery packs.
            DC Charging Module 30KVA


Model DPM500/30 DPM750/20 DPM750 DPM950
Output capacity 15kW 20kW/ 30kW
Input voltage 380Vac three-phase three-wire
Range of input voltage 260V-530V (260-304VA, , output power derating 50%)
Input frequency 50/60HZ
Input power factor 0.99
Input current harmonic ≤3%
Efficiency 0.95
Output voltage 200 VDC -500VDC/ 300VDC -750VDC 200VDC- 750VDC/ 300VDC- 950VDC
Voltage regulation accuracy 0.5%
Current regulation accuracy 1%
Peak-to-Peak noise voltage of DC output 1%
Startup & Shutdown overshoot 10%
Soft start time ≤5S
Operating temperature -20-+60, derating to 60% rated power when the temperature is 50-60
Ambienttemperature -40-+70
Relative humidity 0-90%, 40±2, non-condensing
Altitude 2000 meter
Dimension(W*D*H) mm 220*500*88 220*500*88/ 220*502*132
Weight 9 kg 11 kg/ 15 kg

inquiry

Subject: DPM 15kW / 20kW / 30kW DC Charging Module

CHAT WITH US

Contact SCU sales Team
SCU international Sales Center


Email: enquiry@scupower.com


Tel: 86-311-85903762
Fax: 86-311-85903718

Copyright © 2015-2018 Sicon Chat Union Electric Co.,Ltd.