Home
 
  Company Profile | Product | Features | Contact Us  
 
 
 
General Data
Mains Input Input Mode 3Phase 4 Wires
Input Voltage 380V¡À20%
Input Frequency Range 50Hz¡À10%
Input Frequency Synchronization Range 50Hz¡À10%
Walk In Time(sec.) 60secs
Total Input Harmonics Distortion THDI(%) ¡Ü5%
Bypass Input Input Voltage ¡À10%
Range Input Frequency Syncronized Range 50Hz¡À4%
DC Input Nominal Input Voltage ¡À384V DC
Input Range ¡À334¡«¡À442V DC
Characteristics of
Battery Charging 		Charger Qutput Ripple ¡Ü100mv
Charging Current Limit Yes
Charging Time 10 hours(2 hours back up battery capacity)
Stability of Charging Voltage ¡À1%
Output UPS Power Factor 0.8
Qutput Wave Form sine
Qutput Voltage 380/220V AC
Qutput Frequency 50Hz¡À0.1Hz(mains adnormal or frequency exceed limit)
Frequency Synchronized with Mains 50Hz¡À4%
Qutput Voltage Stability 380/220¡À1%(static mode)
380/220¡À2%(load 0-100% variation)
Qutput Voltage Recovery Time 20ms(load 0-100% variation)
Overload Capability 110%(10mins)
150%(60secs)
1000%(1sec¡¢1cycle)
Transter Time ¡Ü1ms (bypass-inv/inv-bypass)
Crest Factor ¡Ý3
Total Harmonic Distortion THDI(%) ¡Ü3%£¨Linear Load)
¡Ü5%£¨comply EN50091-1 non-linear load)
Efficiency ¡Ý95%(AC-AC)
Frequency Synchronization Range 50Hz¡À4%
Slew Rate 1Hz/sec
Operating
Environment		 Storage Temperature -25¡æ¡«60¡æ
Operating Temperature -5¡æ¡«40¡æ
Permitted Height above Sea Level ¡Ü1500M
Permitted Humidity ¡Ü95% without condensation
Protection Level IP20
Ventilation Mode Air Cooled
Safety Compliance EN60950
EM Standard EN50091-2 CLASS B
Noise ¡Ü55DB
Others Dimension of Cabinet(H¡ÁW¡ÁD)mm 2000¡Á600¡Á800
Communication Mode Dry Contract Alarm,B modes equipped as standard
RS232/RS422 with 8Dry Contact modes Standard
SNMP Selectable
Structure Modular Parallel Structure,Hot Swap Without Interruption
Display VFD/LED
Qutput Power Distribution Selectable
 
Technical Specificaiton of Module 6KVA 10KVA 15KVA
No.of Modules(maximum expansion) 10 nos.expand to 60KVA 10 nos.expand to 100KVA 10 nos.expand to 150KVA
DC Output ¡À384V DC
Input/Output Mode Three Phase In Three Phase Out or Three Phase in Single Phase Out
Dimension of Module H¡ÁW¡ÁD 133mm¡Á19¡ä¡Á420mm
Weight(kg) 10kg 12kg 15kg
Input Power Factor 0.99
Overload Capacitity Comply to System Overload Requirement
Maximum Hear Dissipation 180W 300W 450W
Current Balance among Modules ¡Ü3%
Loop Current among Modules ¡Ü1%
Total Input Harmonic Distortion THDI(%) ¡Ü5%
 
General Data 3KVA-36KVA(3KVA¡Á12) 5KVA-60KVA£¨5KVA¡Á12£©
Mains Input Input Mode 3 phase 4 wires
Input Voltage 380V¡À20%
Input Frequency Range 50Hz¡À10%
Input Frequency Synchronization Range 50Hz¡À10%
Walk In Time(sec.) 60secs
Total Input Harmonics Distortion THDI(%) ¡Ü15%
Bypass Input Input Voltage ¡À10%
Range Input Frequency Syncronized Range 50Hz¡À4%
DC Input Nominal Input Voltage 240V DC(or 48V¡¢110V¡¢220V selectable) 240V DC(or 110V¡¢220V selectable)
Input Range 208V¡«284V DC
Characteristics of
Battery Charging 		Charger Qutput Ripple ¡Ü100mv
Charging Current Limit Yes
Charging Time 10 hours (2 hours back up battery capacity)
Stability of Charging Voltage ¡À1%
Output UPS Power Factor 0.8
Qutput Wave Form sine
Qutput Voltage 380/220V AC
Qutput Frequency 50Hz¡À0.1Hz(mains adnormal or frequency exceed limit)
Frequency Synchronized with Mains 50Hz¡À4%
Qutput Voltage Stability 380/220¡À1%(static mode)
380/220¡À2%(load 0-100% variation)
Qutput Voltage Recovery Time 20ms(load 0-100% variation)
Overload Capability 110%(10mins)
150%(60secs)
1000%(1sec¡¢1cycle)
Transter Time ¡Ü1ms (bypass-inv/inv-bypass)
Crest Factor 3£º1
Total Harmonic Distortion THDI(%) ¡Ü2%£¨Linear Load£©
¡Ü5%(comply EN50091-1 non-linear load)
Efficiency ¡Ý90%£¨AC-AC£©
Frequency Synchronization Range 50Hz¡À4%
Slew Rate 1Hz/sec
Operating
Environment		 Storage Temperature -25¡æ¡«60¡æ
Operating Temperature -5¡æ¡«40¡æ
Permitted Height above Sea Level ¡Ü1500M
Permitted Humidity ¡Ü95% without condensation
Protection Level IP30
Ventilation Mode Air Cooled (speed adjustable fans with redundancy design)
Safety Compliance EN60950
EM Standard EN50091-2 CLASS B
Noise ¡Ü55DB
Others Dimension of Cabinet(H¡ÁW¡ÁD)mm 2000¡Á600¡Á600
Communication Mode Dry Contract Alarm£¬B modes equipped as standard
RS232/RS422 with 8Dry Contact modes Standard
SNMP Selectable
Structure Modular Parallel Structure£¬Hot Swap Without Interruption
Display VFD/LED
Qutput Power Distribution Selectable
 
Tedhnical Specificaiton of Module 3KVA 5KVA
No.of Modules(maximum expansion) 12 nos,expand to 36KVA 12 nos,expand to 60KVA
DC Output 240V DC(or 48V,110V,220V selectable) 240V DC(or 110V,220V selectable)
Input/Output Mode Three Phase In Single Phase Out
Dimension of Module H¡ÁW¡ÁD 133mm¡Á19¡ä¡Á420mm
Weight(kg) 20kg 25kg

Charging Module(if use 48V¡¢110V¡¢220V batteries, can select power charging module)

Each Module can provide 1KW
Charging Power		 Each Module can provide 1.5KW
Charging Power
Input Power Factor ¡Ý0.95
Overload Capacitity Comply to System Overload Requirement
Maximum Heat Dissipation 150W 250W
Current Balance among Modules ¡Ü3%
Loop Current among Modules ¡Ü1%
Total Input Harmonic Distortion THDI(%) ¡Ü15%

 

Company Profile | Product | Features | Contact Us
© Copyright Sicon-emi International Inc 2005-2009